http://www.flaterco.com/xtide/files.html#experts


$Id: README 6742 2018-01-14 18:31:16Z flaterco $

    congen:  constituent generator.
    Copyright (C) 1997  David Flater.

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.


Preface
-------

This README is intended to be read using a monospace font and the UTF-8
character encoding.  One can launch a suitable xterm with the following
command:

LANG=en_US.utf8 xterm -fn -misc-fixed-medium-r-normal--20-200-75-75-c-100-iso10646-1 &


Overview
--------

This is the README file for the Congen package.  The Congen package contains
three distinct pieces, each of which is documented in more detail below:

1.  libcongen, a C++ library for generating the speeds, equilibrium
arguments, and node factors of tidal constituents.

2.  congen, a command-line program for generating the speeds, equilibrium
arguments, and node factors of tidal constituents using text files for input
and output.

3.  Additional scripts that are not normally needed but are useful for
troubleshooting.

THIS PACKAGE IS AVAILABLE FROM:
http://www.flaterco.com/xtide/files.html#experts


Prerequisites
-------------

If libtcd is properly installed, the congen program will automatically be
linked with it and enabled to generate a TCD file in lieu of its usual text
format output.  libtcd can be obtained from:
http://www.flaterco.com/xtide/files.html#libtcd

If libtcd is absent, the congen program will still compile but the -tcd
command line option will be disabled.


Installation
------------

Congen is packaged with GNU automake, so all usual GNU tricks should work.
Help on configuration options can be found in the INSTALL file or obtained by
entering ./configure --help.

Normally, one should only need to do the following to compile and install the
library and client program:

bash-3.1$ ./configure
bash-3.1$ make
bash-3.1$ su
bash-3.1# make install

However, in the event that libtcd is installed in a nonstandard location, an
invocation such as the following might be required:

bash-3.1$ ./configure CPPFLAGS="-I/usr/local/libtcd/include" \
                      LDFLAGS="-L/usr/local/libtcd/lib"
bash-3.1$ make


libcongen
---------

libcongen is a C++ library for generating the speeds, equilibrium arguments,
and node factors of Darwin-style tidal constituents more or less as defined
in SP 98:

   Manual of Harmonic Analysis and Prediction of Tides.  Special Publication
   No. 98, Revised (1940) Edition (reprinted 1958 with corrections;
   reprinted again 1994).  United States Government Printing Office, 1994.

Additionally, libcongen provides limited support for approximating
Doodson-style tidal constituents within the infrastructure of the former.
The Doodson approach is discussed in the following publication:

   Foreman, M.G.G., 1977.  Manual for Tidal Heights Analysis and Prediction.
   Pacific Marine Science Report 77-10, Institute of Ocean Sciences,
   Patricia Bay, Sidney, B.C. (2004 revision).

The Congen header file is intended to be self-documenting with regards to use
of the interface, assuming that one has access to SP 98 and a general
understanding of the subject matter.  Client programs should #include
<Congen> and link with -lcongen -lm.


congen
------

The congen program provides the functionality of libcongen using text files
for input and output.

Usage: congen [-b year] [-e year] [-a1|-a2] [-tcd filename] [-sp98test]
              < congen_input.txt > output.txt

Years may range from 1 to 4000, but the Gregorian calendar is assumed in all
cases.

-b year   Sets the first year for which to generate output.  Default 1970.

-e year   Sets the last year for which to generate output.  Default 2037.

-a1       Calibrate speeds of constituents for 1900-01-01.  This is the
          default and it is necessary for compatibility with US National
          Ocean Service (NOS) predictions.

-a2       Calibrate speeds of constituents for the beginning of the year that
          is midway between the first and last years.

-tcd filename  Instead of sending text format output to stdout, write the
               results as a TCD file.  Requires libtcd.

-sp98test   As a sanity check, generate tables from SP 98 and send to stdout.
            Make sure your terminal is using a monospace font, UTF-8, and at
            least 87 characters wide.

The format of the input file for the congen program is defined below.  Please
see the included file congen_input.txt for numerous examples.

                                - Terminology -

(Vₒ+u)   Constituent argument at beginning of a tidal series
f        Node factor

V        Principal portion of constituent argument
T        Hour angle of mean sun
s        Mean longitude of moon
h        Mean longitude of sun
p        Mean longitude of lunar perigee
p₁       Mean longitude of solar perigee

u        Part of constituent argument depending upon variations in obliquity of
         lunar orbit
ξ        Longitude in moon's orbit of lunar intersection
ν        Right ascension of lunar intersection
ν′       Term in argument of lunisolar constituent K₁
2ν″      Term in argument of lunisolar constituent K₂
Q        Term in argument of constituent M₁
R        Term in argument of constituent L₂
Qᵤ       Term in argument of constituent M₁
N        Longitude of moon's node

r    (For Doodson satellite) Amplitude ratio vs. the main constituent
α    (For Doodson satellite) Phase correction vs. the main constituent

                         - Darwin-style constituents -

A Darwin-style constituent is specified as a line of this form:
  name  Basic   T s h p p₁ c   ξ ν ν′ 2ν″ Q R   f_formula

c is a constant term specified in degrees.  The other lettered fields give
coefficients of the astronomical terms defined above.

With the exception of "unity," for which we use 1, Congen and SP 98 Table 2
identify node factor formulas by their formula numbers in SP 98.  Users of
libcongen have the benefit of symbolic constants defined in the Congen header
file, but in congen input you must supply the number.

  f_1   = 1;
  f_Mm  = 73;
  f_Mf  = 74;
  f_O₁  = 75;
  f_J₁  = 76;
  f_OO₁ = 77;
  f_M₂  = 78;
  f_KJ₂ = 79;
  f_M₁C = 144;  // A71 in SP 98.
  f_M₃  = 149;
  f_M₁  = 206;  // Unique U.S. definition.
  f_L₂  = 215;
  f_K₁  = 227;
  f_K₂  = 235;

                        - Doodson-style constituents -

A Doodson-style constituent begins with a line of this form:
  name  Doodson   T s h p p₁ c   #-satellites
followed by additional lines that specify the indicated number of satellites,
possibly more than one per line.

Each satellite has the following form, which is identical to the format used
in the original IOS tidal package's tide3.dat file:
      Δp -ΔN Δp₁ α r[RN]
(A capital letter 'R' and a digit are optionally suffixed to r.)

Please note:
  Consistent with IOS, ΔN is NEGATED.
  Consistent with IOS, α is specified in ROTATIONS, not degrees.
  Latitude-dependent satellites (those with RN) are IGNORED by congen.

Following is a complete example of a translation from IOS' tide3.dat.

Before:

      R2      2  2 -1  0  0 -1-0.50   2
      R2     0  0  2 .50 0.2535     0  1  2 .0  0.0141

After:

R2-IOS  Doodson   2 0 1 0 -1 180    2
             0  0  2 .50 0.2535     0  1  2 .0  0.0141

Note the differences in the V part of the record.  In Congen terms, the first
part of the record for each constituent in IOS' tide3.dat has the following
form:
   T  s+T  h-T  p  -N  p₁  -c (rotations)

To get T, s, h, p, p₁, c as expected by Congen,
  Given       T       s+T       h-T    p     -N    p₁     -c (rotations)
  Do this    same  subtract T  add T  same  skip  same  multiply by -360
  To get      T        s         h     p           p₁      c (degrees)

N has nowhere to go, but it is almost always zero.  The only exception in the
IHO constituent list is 3N2MS12 (L YZA YZZ).

                           - Compound constituents -

A compound constituent may be specified as a line of this form, providing
coefficients of the indicated constituents:
  name  Compound   O₁ K₁ P₁ M₂ S₂ N₂ L₂ K₂ Q₁ ν₂ S₁ M₁-DUTCH λ₂

Trailing zeroes may be omitted.

Congen uses compiled-in definitions of the indicated constituents to compute
the compound constituent, so each of the 13 may be specified in lazy fashion
using a coefficient of 1 for itself.

                                 - Comments -

Comment lines contain # in the first column.


Additional scripts
------------------

The program diff_congen_output compares two congen outputs, which are assumed
to have been generated from the same or comparable input, and reports on
discrepancies between them.  "Comparable input" means that the constituents
must have the same names, be in the same order, and have the same range of
years.

diff_congen_output ignores the following amount of error:
  speeds:                   0 degrees/hour
  equilibrium arguments:  .01 degree
  node factors:         .0001

This corresponds to rounding differences in the last significant digit of
equilibrium arguments and node factors and zero tolerance for differences in
speeds.

The script XDO2Basic.rb translates an Extended Doodson Number (XDO) as used
in "Standard list of tidal constituents" from the Tide, Water Level and
Current Working Group (TWCWG) of the IHO to the V part of a Congen Basic
constituent definition.  Both numeric and alphabetic forms are supported.

  bash-4.3$ XDO2Basic.rb ABZYZZA     # J1
  XX1  Basic  1 1 1 -1 0 -90

The script Compound2Basic.rb takes Congen format input and reduces all
Compound constituents to Basic format, to the extent possible.  It does not
handle node factors (it sets all of them to 1), and constituents with a
nonzero coefficient for M1-DUTCH are not correctly reducible (warnings are
placed in the output where applicable).

  bash-4.3$ ./Compound2Basic.rb
  2MK3  Compound  0 -1 0 2 0 0 0 0
  2MK3      Basic  3 -4 3 0 0 90      4 -4 1 0 0 0      1


UTF-8 sources
-------------

Some source files in this package, as well as this README, use the UTF-8
character encoding to accurately reproduce the Greek letters and so forth
that were used in the original formulæ.  However, compiling a program that
uses Unicode characters in identifiers is still difficult and not very
portable.  This distribution therefore uses a sed script to automatically
replace the Unicode characters in source files with plain text; λ becomes
lambda, Δ becomes DELTA, etc.

The source code as it was originally intended to look is in the utf8-src
subdirectory of the distribution.  For maximum readability, those wishing to
review the source code should read the sources in utf8-src rather than the
"mangled" versions that are built from them.


Supporting materials
--------------------

Related materials and government publications can be downloaded from
http://www.flaterco.com/xtide/files.html under the headings "For experts" and
"Miscellaneous government publications."


(End of README)


http://www.flaterco.com/xtide/files.html#experts